Roland EGX-400, Руководство по установке

Страница: 7 / 24

NOTES:
Configuring Engraving Cutters
™
Install the Nosecone assembly on the spindle
assembly counterclockwise until it stops and then
clockwise 2 full turns and set to 0 (may need to
mark the nosecone to indicate the 0 position).
•
NOTE: Be careful not to cross thread the
nosecone to the spindle threads. Doing so will
damage the spindle unit.
™
Turn the nosecone clockwise an additional 42
clicks (each tick mark is equal to 0.001”) . This
will adjust the tool for 0.042” which is the depth
for the Raster TM Braille.
™
Loosen the Z screw lock nut. This will allow the Z
Axis to “float”.
™
Using the arrow keys move the nosecone over a
flat area of the material.