Roland EGX-30 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 32

background image

R3-020417

Please read this agreement carefully before opening the sealed

package or the sealed disk package

Roland License Agreement

Roland DG Corporation ("Roland") grants you a non-assignable and non-exclusive right to use the COMPUTER
PROGRAMS in this package ("Software") under this agreement with the following terms and conditions.

1. Coming into Force

This agreement comes into force when you purchase and open the sealed package
or sealed disk package.
The effective date of this agreement is the date when you open the sealed package
or sealed disk package.

2. Property

Copyright and property of this Software, logo, name, manual and all literature
for this Software belong to Roland and its licenser.

The followings are prohibited :

(1) Unauthorized copying the Software or any of its support file, program module

or literature.

(2) Reverse engineering, disassembling, decompiling or any other attempt to

discover the source code of the Software.

3. Bounds of License

Roland does not grant you to sub-license, rent, assign or transfer the right granted
under this agreement nor the Software itself (including the accompanying items)
to any third party.
You may not provide use of the Software through time-sharing service and/or
network system to any third party who is not individually licensed to use this
Software.

You may use the Software by one person with using a single computer in which
the Software is installed.

4. Reproduction

You may make one copy of the Software only for back-up purpose. The property
of the copied Software belongs to Roland.
You may install the Software into the hard disk of a single computer.

5. Cancellation

Roland retains the right to terminate this agreement without notice immediately
when any of followings occurs :
(1) When you violate any article of this agreement.
(2) When you make any serious breach of faith regarding this agreement.

6. Limitations on Liability

Roland may change the specifications of this Software or its material without
notice.

Roland shall not be liable for any damage that may caused by the use of the
Software or by exercise of the right licensed by this agreement.

7. Governing Law

This agreement is governed by the laws of Japan, and the parties shall submit to
the exclusive jurisdiction of the Japanese Court.

Opening the sealed package or sealed disk package implies your acceptance of the terms and conditions of this agreement.
If you do NOT accept this agreement, retain the package UNOPENED. The enclosed Roland product is a single user
version.

«
...
30
31
32

Содержание EGX-30

































Отзывы:

Нет отзывов

Похожие инструкции для EGX-30

CNC ENGRAVER 01

Бренд: Abra Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды