manualshive.com logo in svg

Roland EDIROL PCR-300, Руководство пользователя

Поделиться
Скачать
Roland EDIROL PCR-300 Скачать руководство пользователя страница 9

 

9

 

Using control maps

 

When the PCR-300/500/800 is shipped from the factory, it contains sixteen control 
maps. By switching among these control maps, you can quickly select control maps 
that are suitable for a wide variety of software. For details on the memory numbers of 
these control maps and their factory settings, refer to 

 

Control map list

 

 (p. 90).

 

fig.H-MemorySet.eps

 

1

 

Press the [CONTROL MAP] button.
The [CONTROL MAP] button will light.
The display will indicate the currently selected 
memory number.

 

2

 

Turn the [VALUE] dial to select the memory 
number you want to call up.

If you want to keep the changes you’ve made to the current memory, use the following 
procedure to save the control map. 
You can save the control map in memory numbers 1–F. You can’t save to memory 
number 0.

 

* If you’ve changed the settings of the current memory, be sure to “SAVE” if you want to keep 

your changes.

 

fig.H-Edit.eps

 

1

 

Press the [EDIT] button so it’s lit.

 

fig.D-Edit.eps

 

The display will indicate “EDIT.”

 

fig.D-Save.eps

 

2

 

Turn the VALUE knob to make the display indicate “SAVE.”

 

fig.D-Protect.eps

 

3

 

Press the [ENTER] button.

 

* If the display indicates “PTC,” the Protect setting is ON, and you’ll be 

unable to save the memory. Turn the Protect setting OFF, and repeat the 
procedure from step 1. 
(-> 

 

Protecting the control maps

 

 (p. 13))

 

4

 

Use the VALUE knob or controllers [A1]–[A8] and [B1]–[B8] to specify the 
memory number “1”–”F” in which you want to save the control map. The 
specified memory number will blink in the display.

 

5

 

Press [ENTER] to save the control map. 

 

* If you press another button instead of the [ENTER] button, the Save operation will be cancelled.

 

Switching control maps

You can also switch control maps using the following method.

1.

Press the [EDIT] button so it’s lit. The display will indicate “EDIT.”

2.

Press the [CONTROL MAP] button. It will light, and the display will 
indicate the currently selected memory number.

3.

Use controllers [A1]–[A8], [B1]–[B8], or the VALUE knob to specify the 
memory number you want to call up.

4.

Press the [ENTER] button.

 

Saving a control map

PCR-300_500_800_e.book 9 ページ ２００６年１２月１９日　火曜日　午後２時５９分

Содержание EDIROL PCR-300





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды