Roland DWX-4W, Руководство по установке

Страница: 45 / 64

43
2. Installation and Setup
2. Installation and Setup
2. Installation and Setup
Steps to Perform Following Installation
Before Starting Operations
Be sure to perform the following tasks after installing this machine. These tasks are also required when chang-
ing the installation location of the machine.

STEP 1: Installing the Waterproof Plate

STEP 2: Filling the Coolant Tank

STEP 3: Spindle Run-In (Long)

STEP 4: Automatic Correction
STEP 1: Installing the Waterproof Plate
WARNING
Be sure to install the waterproof plate.
If you forget to install the waterproof plate, water will leak around the machine.
The waterproof plate has a top, bottom, front, and back side. Be careful of the orientation when installing. If
the waterproof plate is attached in the wrong orientation, the waterproof plate may become damaged or
water may leak.
Installation
Procedure

Open the front cover.

Insert the waterproof plate from above between the machine and the inside of the front
cover.
The work will be easier when performed from the side or the back of the machine.
The waterproof plate has a top,
bottom, front, and back side.
Be careful of the orientation
when installing. If the orienta-
tion is not correct, the plate
may interfere with opening
and closing the front cover.
Front
cover side
Waterproof plate
Cross-section
Top
Machine
side
Bottom