Roland DP603, Руководство пользователя

Страница: 25 / 34

23
Advanced Operation
Provision of
Bluetooth
functionality
Please be aware that depending on the country in which you
purchased the unit, Bluetooth functionality might not be included.
The Bluetooth logo appears
when you turn on the power.
If Bluetooth functionality is included
Here’s What You Can Do
Bluetooth functionality creates a wireless connection between a
mobile device such as a smartphone or tablet (subsequently referred to
as the “mobile device”) and this unit, allowing you to do the following.
Bluetooth audio
Music data played back by the mobile device can be heard through
this unit’s speakers.
Page-turning
A music score display app on the mobile device can be controlled
from this unit.
MIDI data transmission and reception
MIDI data can be exchanged between this unit and the mobile device.
Using Bluetooth Audio
Registering a Mobile Device (Pairing)
“Pairing” is the procedure by
which the mobile device that
you want to use is registered
on this unit (the two devices
recognize each other).
Make settings so that music data
saved on the mobile device can
be played wirelessly via this unit.
MEMO
5
Once a mobile device has been paired with this unit, there is
no need to perform pairing again. If you want to connect this
unit with a mobile device that has already been paired, refer
to “Connecting an Already-Paired Mobile Device” (p. 23).
5
Pairing is required again if you execute a Factory Reset (p. 19).
5
The following steps are one possible example. For details,
refer to the owner’s manual of your mobile device.
1.
Place the mobile device that you want to connect nearby
this unit.
MEMO
If you have more than one unit of this model, power-on only the
unit that you want to pair (power-off the other units).
2.
Press the [Ambience] button and [Brilliance] button
simultaneously.
3.
Use the [
K
] [
J
] buttons to select “ Bluetooth Audio,” and
then press the [
s
] (Enter) button.
The
Bluetooth
Audio screen appears.
4.
Use the [
K
] [
J
] buttons to select “ Bluetooth Pairing,” and
then press the [
s
] (Enter) button.
The display indicates “Now pairing...”, and this unit waits for a
response from the mobile device.
MEMO
If you decide to cancel pairing, press the [
u
] (Exit) button.
5.
Turn on the Bluetooth function of the mobile device.
MEMO
The explanation here uses the iPhone as an example. For details,
refer to the owner’s manual of your mobile device.
6.
Tap “DP603 Audio” that is shown in the Bluetooth device
screen of your mobile device.
This unit is paired with the mobile device. When pairing succeeds,
“DP603 Audio” is added to the list of “Paired Devices” on your
mobile device.
MEMO
If the mobile device’s screen asks you to enter a “Pass Key,” enter
“0000” (four zeros).
7.
Simultaneously press the [Ambience] button and
[Brilliance] button to exit Function mode.
Specifying the
Bluetooth
ID
You can specify a number that is added following the device
name of this unit when it is displayed by a Bluetooth -
connected application.
If you own multiple units of the same instrument, this is a
convenient way to distinguish them.
1.
Press the [Ambience] button and [Brilliance] button
simultaneously.
2.
Use the [
K
] [
J
] buttons to select “ Bluetooth ID,” and
then press the [
s
] (Enter) button.
3.
Use the [–] [+] buttons to edit the value of the setting.
Value Explanation
0–99
Set to “0”: “DP603 Audio”, “DP603” (default value)
Set to “1”: “DP603 Audio1”, “DP603_1”
Connecting an Already-Paired Mobile Device
1.
Turn on the Bluetooth function of the mobile device.
MEMO
5
If you were unable to establish a connection using the
procedure above, tap “DP603 Audio” that is displayed in the
Bluetooth
device screen of the mobile device.
5
To disconnect, either turn this unit’s Bluetooth Audio function
“Off” (Function mode
0
“
Bluetooth
Audio”
0
“
Bluetooth
Audio” Off) or turn the mobile device’s Bluetooth function off.
Adjusting the Volume of
Bluetooth
Audio
Normally you’ll adjust the volume on your mobile device.
If this does not provide the volume adjustment you want, you can
adjust the volume as follows.
1.
Proceed with steps 2–3 of “Registering a Mobile Device
(Pairing)” (p. 23).
2.
Use the [
K
] [
J
] buttons to select “ Bluetooth Volume,” and
use the [–] [+] buttons to adjust the volume.
page
23
page
24
page
25
Pairing
˙ Using the
Bluetooth
® Functionality