Roland DP603, Руководство пользователя

Страница: 27 / 34

25
Advanced Operation
Transferring MIDI Data
Here’s how to make settings for transmitting and receiving MIDI data
between this unit and the mobile device.
Note when using an already-paired iOS device
The following operation is required after each time that you
switch the Bluetooth page-turning/MIDI function or execute a
factory reset.
1
Disconnect “DP603.”
2
Turn off.
For details, refer to the owner’s manual of your iOS device.
iOS
1.
Place the mobile device that you want to connect nearby
this unit.
MEMO
If you have more than one unit of this model, power-on only the
unit that you want to pair (power-off the other units).
2.
Press the [Ambience] button and [Brilliance] button
simultaneously.
3.
Use the [
K
] [
J
] buttons to select “ Bluetooth Page Turn/
MIDI,” and then press the [
s
] (Enter) button.
4.
Use the [
K
] [
J
] buttons to select “ Bluetooth Turn/MIDI,”
and use the [+] button to select “MIDI.”
5.
Turn on the Bluetooth function of the mobile device.
MEMO
The explanation here uses the iPhone as an example. For details,
refer to the owner’s manual of your mobile device.
6.
In the mobile device’s app (e.g., GarageBand), establish a
connection with this unit.
NOTE
Do not tap the “DP603” that is shown in the
Bluetooth
settings of
the mobile device.
Connection status between this unit and the mobile device
Depending on the functionality of the mobile device that’s
connected, this unit’s display will show the following icons.
Function Displayed icon
Bluetooth audio function
(AUDIO)
Page turning function
(PAGE)
MIDI data transmit/receive
(MIDI)
Page turning function and MIDI
data transmit/receive
(P+MID)