Discover5
Dec, 2002
HOW TO SAVE - HOW TO VERSION UP
Since Discover5 has a flash memory for the System Program registration, you can update it by floppy disk.
Items required:
Software Update Disk Discover5
(code: 7773536000)
Test Update Disk Discover5
(code: 7773537000)
ATTENTION:
The
Test Program
has not been installed in this instrument (otherwise it would have occupied too much
memory).
If you want to install it, you have to load the test program from the Discover5 Test program disk you've
been provided with.
WARNING:
Loading the Test Program causes the System Program of your Discover5 to be lost
.
Therefore every time you want to carry out some checks in your Discover5 and consequently have to
install the Test Program,
we strongly recommend
you to make a back-up copy of your Discover5 current
System Program, according to the procedure described in the paragraph "HOW TO SAVE THE SOFTWARE
ON A FLOPPY DISK”
Of course, once you've completed your tests, you'll have to re-load the System Program (that has been can-
celled when installing the Test Program), following the procedure described in the paragraph "HOW TO UPDA-
TE THE SOFTWARE AND/OR TO LOAD THE TEST PROGRAM FROM FLOPPY DISK
HOW TO VISUALIZE THE “SYSTEM PROGRAM” VERSION
Turn the instrument on while keeping the CHAIN, TOP and FADE OUT/IN buttons pressed.
The display visualizes:
You can check the instrument software version, pressing the TONE/ USER PROGRAM 1 button.
After a few seconds the display shows:
To exit from this screen display, turn the instrument off.
Discover5
Ver. XX . XX
Day Month Day no. Time Year
CPU Bios Version: Ver. XX . XX
Flash : xxxxxxxx Size : xxxxxxx byte
**** SYSTEM MENU ****
1 . DISPLAY VERSION
2 . LOAD SYSTEM
3 . SAVE SYSTEM
HOW TO SAVE THE SOFTWARE ON A FLOPPY DISK
Turn the power on by keeping the buttons CHAIN, TOP and FADE OUT/IN pressed. The display visualizes:
·
Insert a formatted (by the instrument) HD floppy disk into the floppy disk drive.
Pressing the button TONE/USER PROGRAM 3, you enter the software saving procedure.
The display visualizes:
Pressing the button TONE/USER PROGRAM 2 you exit the saving procedure and the instrument goes back to
the intial display.
Pressing the button TONE/USER PROGRAM 1 you go on saving the software on disk. The display visualizes:
When the display requires it, insert the second floppy disk.
When the saving operation is completed, the display visualizes:
The correct saving of the software is confirmed by the writing: SYSTEM SAVING COMPLETED.
Turn the power off and on again to go back to the initial program.
**** SAVE SYSTEM ****
Checksum Calculation …..
DONE
System saving ….
COMPLETED
<< TURN INSTRUMENT ON AGAIN >>
**** SAVE SYSTEM ****
Checksum Calculation ….DONE
System saving ….XXXXXXX
ATTENTION ! ! Do not turn instrument off
**** SAVE SYSTEM ****
1: CONTINUE
2: EXIT
**** SYSTEM MENU ****
1 : DISPLAY VERSION
2 : LOAD SYSTEM
3 : SAVE SYSTEM
11
