Roland Camm-1 GR2-540, Руководство по установке

Страница: 39 / 39

37
3.Appendix
Specifications
GR2-640 GR2-540
Drive system Digital control servo motor
Cutting mechanism Media-moving method
Acceptable
material
size ( *1 )( *2 )
Width 50 to 1,782 mm (1.97 to 70.1 in.) 50 to 1,594 mm (1.97 to 62.7 in.)
Thickness Thickness including backing paper is 0.8 mm (31.4 mil.) or less
Roll weight 24 kg (52.9 lb.) 20 kg (44.1 lb.)
Maximum cutting area
(width x length)
1,627 mm (64 in.) × 50,000 m
m
(1,968 in.)
1,372 mm (54 in.) × 50,000 mm
(1,968 in.)
Usable tools CAMM-1 series blade (including blades for flatbed use)
Cutting speed 30 to 1,530 mm/s (1.19 to 60 in./s)
Blade force 5
~
600 gf
Mechanical resolution 0.006 mm/step (0.236 mil./step)
Software resolution 0.025 mm/step (0.98 mil./step)
Distance accuracy ( *3 )
Error of less than ±0.1% of distance traveled or 0.254 mm (10 mil.) , whichever is
greater
Repeatability (
*3
) (
*4
) 0.1 mm (3.94 mil.) or less
Connectivity
Ethernet (automatic switching between 10BASE-T and 100BASE-TX)
USB 2.0 (FULL SPEED compliant)
RS-232C
Replot memory 32 MB
Command system HP-GL, HP-GL/2 compliant
Power requirements AC 100 to 240 V ± 10%, 50/60 Hz
Power consumption Approx. 110 W
Acoustic
noise level
During
operation
56 dB (A) or less
During
standby
40 dB (A) or less
Dimensions (Width x Depth
x Height)
1,982 mm × 756 mm × 1,127 mm (78.1
in × 30 in × 44.4 in.)
1,711 mm × 651 mm × 1,111 mm (68
in × 25.7 in × 44 in.)
Weight 69 kg (153 lb.) 60 kg (133 lb.)
Packaging dimensions
2,200 mm × 395 mm × 880 mm (87 in
× 15.6 in × 34.7 in.)
2,040 mm × 395 mm × 850 mm (81 in
× 15.6 in × 33.5 in.)
Packaging weight 97 kg (214 lb.) 85 kg (188 lb.)
Environment Temperature: 15 to 30°C (59 to 86°F), humidity: 25 to 75%RH (no condensation)
Accessories USB cable, cutting pad, safe blade, dedicated stand, Tweezers, user's manual, etc.
*1 Depending upon the type, material that is 500 mm (19.6 in.) or longer may shift during cutting.
*2 You may also be unable to cut some types of material.
*3 According to material and cutting conditions as specified by Roland DG Corporation.
*4 Excluding expansion/contraction of the material.