Roland Cakewalk UA-25 EX, Руководство пользователя

Страница: 26 / 64

26
Driver Installation and Settings
1
In the Applications – Utilities folder, double-click Audio MIDI Setup to start it up.
2
Click the MIDI Devices tab.
3
Verify that the UA-25EX is shown in the Audio MIDI Setup dialog box.
* If the UA-25EX is not shown, or if it is grayed-out, the UA-25EX has not been recognized correctly.
Try clicking Rescan MIDI . You can also try disconnecting and reconnecting the UA-25EX’s USB
cable.
* If you’ve previously installed a different version of the driver, the former settings could still exist.
If so, click the grayed-out UA-25EX to select it, and then click Remove Device to delete the
settings.
4
Click Add Device .
The screen will indicate “new external device.”
5
Specify the Device Name for the new external device .
1. Click the “new external device” that was added, and then click Show Info .
2. In the Device Name field, type UA-25EX .
6
Using the mouse, drag the up/down arrows that indicate the input/output ports so that they are
connected in the following combination.
• The UA-25EX’s
▲
/
▼
with the added UA-25EX’s
▲
/
▼
.
7
Check to make sure that MIDI transmission and reception takes place normally. Proceed as follows.
1. Click Test Setup . The mouse cursor will change shape.
* If a sound module is connected to the UA-25EX, the following step will cause a fairly loud
sound to be produced from the sound module; turn down the sound module’s volume
before you proceed.
2. If a sound module is connected to the UA-25EX’s MIDI OUT connector, click the corresponding
external device. If the sound module produces sound, the settings are correct.
3. Click Test Setup once again to end the test.
8
Close the Audio MIDI Setup dialog box. This completes the settings.
MIDI input/output device settings
UA-25EXCW_e.book 26 ページ ２００９年４月１３日 月曜日 午後１２時３３分