Roland BK-5OR Скачать руководство пользователя страница 66

Страница: 66 / 134

Menu options

Backing Keyboard BK-5 OR

Key

This function allows you to transpose the BK-5 OR’s
pitch in semi-tone steps. Depending on the mode set-
ting, this transposition applies to all sections or just a
specific section. It can be selected using [MENU] button
‰ “Performance Edit” ‰ “Key” or by pressing the [KEY]
button. See “Changing the key” on p. 44.

NOTE

Pressing and holding the [KEY] button locks this parameter
and keeps it from changing when you select Performance
memories.

Key

Allows you to set the desired transposition interval.
Each value represents a semi-tone step. Select “0” if
no transposition is required.

Mode

Allows you to specify which sections should be trans-
posed by the “Key” parameter.

Song:

Only song playback is transposed.

Keyboard:

Only the notes you play on the keyboard

are transposed. (This also affects the chord informa-
tion transmitted to the Arranger.)

Song+Keyboard:

Both song playback and the key-

board parts are transposed. Rhythm playback is also
transposed.

‘Arranger Setting’ parameters

This function group can be selected using [MENU] but-
ton ‰ “Performance Edit” ‰ “Arranger Setting”.

The parameters of this function group apply to the
Arranger as a whole and allow you to fine-tune its
behavior.

Arranger

Select “Off” if you only need the drum part of the
selected rhythm and no melodic accompaniment
parts (ABass, ACC1~6).

Zone

When you press the [SPLIT] button, the selected
rhythm pattern is controlled by the chords you play
in the left half of the keyboard.

You can also tell the Arranger to scan another part of
the keyboard for usable chords. Though “Left” is
probably the most popular setting, you could select
“Right” to have the Arranger scan the right half of
the keyboard.

Switch off the [SPLIT] button if the Arranger should
scan the entire keyboard (“Whole”).

The range of the left and right keyboard areas
depends on the “Split Point” setting (page 65).

Type

Another important choice is how you want to trans-
mit note information to the Arranger.

NOTE

If the “Arr Type” parameter (page 70) is set to “On”, this
“Type” setting has no effect.

Standard:

This is the normal chord recognition

mode.

Pianist1:

In this mode, the BK-5 OR only recognizes

chords that consist of at least three notes. Playing
only two notes will not cause the rhythm’s key to
change.

Pianist2:

Same as “Pianist1” while the Hold pedal is

not pressed. If you press the Hold pedal, the BK-5 OR
even recognizes “chords” when you press only one
note. If the hold pedal is still pressed, chord recogni-
tion continues up to a maximum of 5 played keys.

Intelligent:

Select this option when you want the

chord recognition function to supply the missing
notes of the chords you play.

Easy:

This is another “intelligent” chord fingering sys-

tem. It works as follows:

Parameter

Setting

Key

–6~+5

Parameter

Setting