Roland BK-5, Руководство пользователя

Страница: 60 / 152

Menu options
60
r
Backing Keyboard BK-5
NOTE
For some sounds, negative (–) “Resonance” settings may
produce no noticeable change because the Resonance is
already set to the minimum value.
Attack (only for Tones)
This parameter adjusts the onset of the sound. Nega-
tive values speed up the attack, so that the sound
becomes more aggressive.
Decay
This parameter adjusts the time over which the
sound’s volume and cutoff frequency fall from the
highest point of the attack down to the sustain level.
NOTE
Percussive sounds usually have a sustain level of “0”. Piano
and guitar sounds are in this category. Holding the keys for
a long time will have little effect on the duration of the
notes you are playing, even if you select a high value here.
Release
This parameter adjusts the time over which the sound
will decay after the note is released until it is no
longer heard. The cutoff frequency will also fall
according to this setting.
Vibrato Rate
This parameter adjusts the speed of the pitch modu-
lation. Positive (+) settings make the preset pitch
modulation faster and negative (–) settings make it
slower.
Vibrato Depth
This parameter adjusts the intensity of the pitch
modulation. Positive (+) settings mean that the
“wobble” becomes more prominent, while negative
(–) settings make it shallower.
Vibrato Delay
This parameter adjusts the time required for the
vibrato effect to begin. Positive (+) settings increase
the time before vibrato will begin and negative set-
tings shorten the time.
C1
The function of this parameter depends on the sound
you assigned to the selected part. It may influence
the filter and resonance setting, switch between the
organ samples with the fast and slow Rotary modu-
lation, etc.
‘Tone Part MFX’ parameters
This function group can be selected using [MENU] but-
ton ‰ “Performance Edit” ‰ “Tone Part MFX”. Your BK-5
contains a multi-effects processor that can be used for
processing any keyboard part you like. See “Mfx” on
p. 58. (There are also 3 Mfx processors for the rhythm/
song parts).
Mfx Switch
Select “Off” if you don’t need the Mfx processor.
Mfx Type
The BK-5 provides 84 different multi-effect types,
some of which are combinations of two effects for
added flexibility. This parameter allows you to select
the desired type. The available types are:
NOTE
Some of the names shown above may be abbreviated in the
display.
Parameter Setting
Attack –64~+63
Parameter Setting
Decay –64~+63
Parameter Setting
Release –64~+63
Parameter Setting
Vibrato Rate –64~+63
Parameter Setting
Vibrato Depth –64~+63
Parameter Setting
Vibrato Delay –64~+63
Parameter Setting
C1 0~127
Parameter Setting
Mfx Switch Off, On
1. Thru
2. Stereo EQ
3. Overdrive
4. Distortion
5. Phaser
6. Spectrum
7. Enhancer
8. Auto Wah
9. Rotary
10. Compressor
11. Limiter
12. Hexa-Chorus
13. Trem Chorus
14. Space-D
15. St. Chorus
16. St. Flanger
17. Step Flanger
18. St. Delay
19. Mod. Delay
20. 3 Tap Delay
21. 4 Tap Delay
22. Time Delay
23. 2 Pitch Shifter
24. FBK Pitch
25. Reverb
26. Gate Reverb
27. OD‰ Chorus
28. OD‰ Flanger 29. OD‰ Delay
30. DST‰ Chorus
31. DST‰ Flanger
32. DST‰ Delay
33. EH‰ Chorus
34. EH‰ Flanger
35. EH‰ Delay
36. Chorus‰ DLY
37. Flanger‰ DLY
38. CHO‰ Flanger
39. CHO/DLY
40. Flanger/DLY
41. CHO/Flanger
42. Isolator
43. Low Boost
44. Super Filter
45. Step Filter
46. Humanizer
47. Speaker Sim
48. Step Phaser
49. MLT Phaser
50. Inf Phaser
51. Ring Modul
52. Step Ring
53. Tremolo
54. Auto Pan
55. Step Pan
56. Slicer 57. VK Rotary
58. 3D Chorus
59. 3D Flanger
60. 3D Step Flgr
61. Band Chorus
62. Band Flanger
63. Band Step Flg
64. VS Overdrive
65. VS Distortion
66. GT Amp Simul
67. Gate
68. Long Delay
69. Serial Delay
70. MLT Tap DLY
71. Reverse DLY
72. Shuffle DLY
73. 3D Delay
74. Long Time DLY
75. Tape Echo
76. LoFi Noise
77. LoFi Comp
78. LoFi Radio
79. Telephone
80. Phonograph
81. Step Pitch
82. Sympa Reso
83. Vib-Od-Rotary
84. Center Canc
BK-5_US.book Page 60 Monday, November 14, 2011 12:43 PM