Roland BK-3, Быстрое руководство

Страница: 39 / 44

QUICK GUIDE 39
Transponer UPPER/LWR-parter i oktaver
Med denne funktion kan du vælge at transponere en Livepart (eller begge) i oktavtrin.
(Der kan vælges -4~0~+4 oktavspring).
1. Tryk på OKTAVE [+]/[-] knappen.
2. Tryk [UP] eller [DOWN] for at vælge den ønskede part, som skal ændres (UPPER eller
LWR).
3. Brug OKTAVE [+] eller [-] knappen for at vælge den ønskede ”Oktav” indstilling.
34
14. Other important functions
This section presents other important functions you may need regularly.
Transposing to a Different Key
This function allows you to transpose the BK-3’s pitch in semi-tone steps.
Depending on the mode setting, this transposition applies to all sections
or just a specific setting. See p. 48.
1.
Press [KEY] button.
The display changes to:
The current “KEY” setting (transposition interval) is displayed and
already selected.
MEMO
Pressing and holding the [KEY] button locks the “Key” setting.
2.
Use the [INC] or [DEC] button to select the desired “Key”
setting.
“Key” setting
-6 ~ 0 ~ +5 (semitone units)
If the “Key” setting differs from “0”, the [KEY] indicator lights.
After a few seconds, the “KEY” pop-up window disappears. Press the
[EXIT] button to close it immediately.
NOTE
If you choose to transpose the real-time parts, rhythm playback
is also transposed.
MEMO
You can also change the key setting using [MENU] button 
“Performance Edit”  “Key” (p. 48).
Changing the Octave
This function allows you to transpose the real-time parts (Upper and
Lower)1 up or down in octave steps.
1.
Press OCTAVE [-]/[+] button
The display changes to:
2.
Use the [UP] or [DOWN] button to select the desired real-
time part Upper (UPP) or Lower (LWR).
3.
Use the OCTAVE[-] or [+] button to select the desired
“Octave” setting.
“Octave” setting
-4 ~ 0 ~ +4 (semitone units)
MEMO
You can also change the octave setting using [MENU] button 
“Performance Edit”  “Tone Part View”  “Octave Shift” (p. 45).
Using the ‘Melody Intell(igent)’
Function
The automatic accompaniment can add a counter-melody to the notes
you play with the Upper part (UPP). Those automatic harmonies are based
on the chords you play in the chord recognition area.
The counter-melody is played by the Melody Intelligent part. There are 18
harmony types to choose from. See “Melody Intelligent” settings” p. 50
1.
Press the [MELODY INTELL] button (so that it lights).
This adds a harmony to the notes you play.
If you want you can change the Melody Intelligent Parameters:
2.
Press [MENU] button  “Performance Edit”  “Melody
Intelligent”
For more information about Melody Intelligent Parameters see p.
50