Roland 5100011346 -01 Скачать руководство пользователя страница 91

Страница: 91 / 120

Troubleshooting

USB memory is not recognized
Files are not displayed

• It may be that the USB memory has not been formatted

correctly. If the USB memory was formatted by a device other
than the SD-50, use the SD-50 to format it (p. 76).

Can’t back up to USB memory

Check the following points.

• Could the USB memory be write protected?

• Does the USB memory has sufficient free space?

Playlist is not displayed

This might be due to one of the following reasons.

• The playlist might not be displayed if you directly add/delete/

modify the song data in the SD-50 folder without using
Playlist Editor.

• It may be that the USB memory has not been formatted

correctly. If the USB memory was formatted by a device other
than the SD-50, use the SD-50 to format it (p. 76).

Songs are not displayed

This might be due to one of the following reasons.

• Is the song located in the root directory?

• The song might not be displayed if you directly add/delete/

modify the song data in the SD-50 folder without using
Playlist Editor.

• It may be that the USB memory has not been formatted

correctly. If the USB memory was formatted by a device other
than the SD-50, use the SD-50 to format it (p. 76).

Song does not play

This might be due to one of the following reasons.

• Is a “?” symbol shown in the list of songs for the playlist?

• The song’s file type is not one that the SD-50 can play.

• The song data might be damaged.

• The song cannot be played if you directly add/delete/modify

the song data in the SD-50 folder without using Playlist
Editor.

Can’t hear the playback

• Is the playback volume set correctly?

Go to the play screen and adjust the playback volume (p. 66).

Problems with USB Memory

Problems with Songs

SD-50_e.book 91 ページ２０１０年１月２５日　月曜日　午前１０時５２分

Содержание 5100011346 -01

























































































































Результаты поиска

Содержание 5100011346 -01

Отзывы:

Похожие инструкции для 5100011346 -01

Бренды по названию

Популярные бренды

Roland 5100011346 -01, Руководство пользователя

Результаты поиска

Содержание 5100011346 -01

Отзывы:

Похожие инструкции для 5100011346 -01

Бренды по названию

Популярные бренды