background image

WARNING

All  long  loads  such  as  (but  not  limited  to)  Canoes,  Kayaks,  Sailboards, Paddle
Boards  and  Construction  materials  must  be  tied  down  to  the  front  and  rear
bumpers  or  tow  hooks.  All  loads  must  be  secured  with  non-­stretch straps.

Cross  Bars  are  not  for  off  road  use,  use  on  trailers  or  towed vehicles.

Be  aware  of  the  carried  load  width  and  height  as  these  can  affect  car  handling,
parking  garage  use  or  other  vehicle  height  restrictions.  Users  are  responsible for
understanding  and  obeying  government  laws  where  they drive.

Do  NOT  use  ROLA  cross  bars  and  accessories  for  purposes  other  than  what they
are  intended  for  or  exceeding  stated  load  limits.  Failure  to  do  so  will voidall
warranties.

All  ROLA  locks  should  be  turned  and  lubricated  periodically.  Locks  are  intended
to  deter  theft  but  are  not  theft  proof,  please  remove  valuable  gear  if  left
unattended.  Place  a  spare  key  in  the  glovebox  or  some  secure area.

Check  and  replace  worn  out  or  defecive parts.

The  load  carrier  should  always  be  cleaned  and  maintained,  especially in
the winter.

Screws,  nuts  and  locks  (if  fitted)  should  be  lubricated  at  regular intervals.

When  not  in  use,  the  product  should  be  removed  from  the vehicle.

When  the  product  is  removed  from  the  vehicle,  all  loose  parts  should be
stored safely.

Road  speed  should  always  be  adjusted  to  suit  the  load  being  carried  and  the
current  driving  conditions  such  as  road  type  and  quality,  wind  conditions, traffic
intensity  and  applicable  speed limits.

Note  that  the  vehicle’s  total  height  increases  when  upright  loads  are carried.

The  vehicle’s  driving  characteristics  and  braking  behavior  change  and  it’s  
vulnerability  to  side  winds  increases  when  a  load is    carried  on  the roof.

Products  fitted  with  a  lock  should  always  be  locked  during transport.

The  proper  attachment  of  this  product  in  accordance  with  the  enclosed  instructions  is  critical  to  its  proper  performance. See instructions    
for  proper  attachment,  proper  usage,  and  important  safety  messages.  Horizon  Global  has  no  control  over,  or    responsibility  for,  the  
attachment  or  the  installation.  Horizon  Global  is  NOT  responsible  nor  will  it  be  held  liable  for  any    damage  resulting  from  its  attachment  or  
improper  use.  Horizon  Global  shall  not  be  liable  for  any  claims  of  any  kind    greater  than  the  purchase  price  of  the  product.  Warranty  
information  available  upon request.

NOTICE

:  Your  cross  bars  will  not  prevent  property  damage  that  may  result  from  improper  loading,  securing,  or driving.

PAGE 3

Review  all  Warnings,  Instructions,  and  Warranty  information  carefully.    
Failure  to  follow  these  warnings  and  instructions  will  void  the

 

Warranty.

Содержание 59970





























Отзывы: