Roksan Audio TR-5 S2, Руководство пользователя

Страница: 7 / 12

TR-5 S2 Loudspeaker
Manual
7
SETUP
Please refer to earlier speaker terminal panel view
There are two sets of terminals the upper set corresponds to the tweeter (HF) and the lower
to the woofers (LF). There is a small illustration printed on the rear label for your reference.
The TR-5 S2 loudspeaker comes supplied with a set of two removable ‘jump-bars’ already
connected. To connect the loudspeaker conventionally, simply attach your speaker cable to
the lower set of terminals marked ‘woofer’ (LF). Make sure that both loudspeakers are
connected in the correct polarity with respect to the output terminals of your amplifier:
CONNECTING LOUDSPEAKER CABLES - CONVENTIONAL
and
or
RIGHT
RED
+VE
LEFT
BLACK
-VE
RIGHT
RED
+VE
LEFT
BLACK
-VE
and
and
and
IMPORTANT:
Always switch the amplifier(s) off before attempting to connect or disconnect the speaker
cables to/from your loudspeakers. Failure to do this may cause permanent damage to the
amplifier and/or the loudspeakers.
CONVENTIONAL
NOTE: ‘JUMP BARS’ CONNECTED