Rokonet ORBIT-PRO RP296MUD, Руководство пользователя

Страница: 31 / 36

user manual
23
Section 7: System Troubles
A rapid flashing of the POWER LED indicates a trouble condition. To view and identify the
trouble, proceed as follows:
For LCD KP - with the system disarmed, press and scroll the display till you reach
3) VIEW, press [ENTER]. Enter your User Code and press [ENTER]. The first trouble
condition will be displayed. If a (
Ļ
) appears, other troubles exist. Scroll down for the next
ones.
For LED KP - with the system disarmed, press . The POWER LED should begin to
flash slowly, indicating entry to the User Functions mode. Select the View/Trouble function
by pressing [ 3 ] [ 1 [USER CODE ] [ENTER]. The ZONE LEDs will flash according to
the trouble(s). Refer to the following table to identify the trouble.
TROUBLE DESCRIPTION LCD KP LED KP RESPONSE
Low
Battery
the capacity of
the battery is low
(or missing) and
needs to be
recharged (or
replaced)
ZONE 1 LED
WILL FLASH
contact your
dealer
Loss of
AC Power
the commercial
power has been
interrupted; the
system will
continue to
operate on its
standby battery
as long as
possible
ZONE 2 LED
WILL FLASH
Check the
connection of
the panel's
transformer to
its AC source.
be sure that
power has not
been
interrupted or
switched off
Bell Circuit
Failure
the circuit
connecting the
external
sounder(s) to the
system is faulted
Three short
beeps at 10-sec
intervals will be
heard.
ZONE 3 LED
WILL FLASH
Press the # key
to stop the
beeps, and
contact your
dealer
Auxiliary
Failure
the panel's
auxiliary power,
used to supply
electric current to
designated
devices (e.g.
motion detectors,
keypads, smoke
detectors), has
failed
NOTE: The above
indication cannot be
displayed if the
Auxiliary Failure has
affected all of the
system's keypads and
caused them to
become inoperative.
ZONE 4 LED
WILL FLASH
(see NOTE at
the left)
contact your
dealer
TROUBLE:
MAIN:LOW BATT
.
TROUBLE:
MAIN:AC TROUBLE
TROUBLE:
MAIN: AUX TRBL
TROUBLE:
MAIN:
BELL