Rokonet ORBIT-PRO RP296MUD, Руководство пользователя

Страница: 16 / 36

user manual
8
Section 3: Operating Your System
In this section, you'll learn how to perform most of the functions needed to
properly operate your ORBIT-PRO and to get the most out of your security
system.
EMERGENCY KEYS
Your keypad provides three sets of keys, which can be pushed at any time the
police, fire department, or auxiliary assistance is required.
Police Emergency
Pressing and simultaneously,
and for at least two seconds, will activate a
Police Emergency alarm (Panic alarm).
Fire Emergency
Pressing and simultaneously,
and for at least two seconds, will activate a
Fire Emergency alarm.
Auxiliary Emergency
Pressing and simultaneously,
and for at least two seconds, will activate an
Auxiliary Emergency.
The annunciation that results during these emergency alarms, along with other
system sounds, is covered in Section 4.
If your system has been programmed to do so, it will communicate any or all of
these alarms to the Central Station monitoring your installation. System
programming also determines whether these emergency alarms will be audible
and/or capable of being communicated to the Central Station.
Keyswitches
If your system is equipped with a special keyswitch, it can, with the twist of a
key, be toggled through ARM (Away) and DISARM modes.
Note: Hidden Display
It is desired for some systems, that the keypad will not display the status of the
system. (If set in this mode) the ARM, READY & BYPASS LEDS will not
function and the LCD display Enter code: After entering a valid user code the
system will work and display the normal mode. One minute after the last
operation, the system will automatically switch to the Hidden Display Mode.