21
●
●
●
●When the exit time is finished, StyAll,StayP1 or StayP1P2 will be
displayed on the LCD corresponding to which partition was stay
armed.
●When it is stay arm, the zones which are preset as stay zones will be
bypassed (means will not be armed).
If the system is set as Quick Stay Arm off, then press [STAY], and put
in correct code and press [#] to stay arm the system. If the system is set
as Quick Stay Arm on, then just press [STAY] to arm the whole
system.
Use [←] and [→] to choose Stay All, Stay Partition 1, Stay Partition 2,
Stay Partition 3 or/and Stay Partition 4. And then confirm by [#].
Repeat and stay arm the partitions one by one.
When the system is armed, it will give to beeps “beep, beep--”,
which means the exit delay time starts, make sure the windows are
closed and leave the protected areas before the delay time is finished.
1.When the system is armed, press any key, the screen will display
“Please put in Code”. Put in the code and press [#], the screen will
display “System Disarmed”, and will be back to the initial state:
●When set Quick Arm On, arm the system without code.
Stay Arm
System Disarm
i
Wireless Alarm System
Do218
