background image

Safety Precautions

Carefully read the instruction manual before use

Warning: Carefully read the following safety precautions before use in order to avoid causing harm to yourself and others or property damage. The 
safety precautions are divided into 2:"Warning" and "Caution" are important instructions for safe use of the appliance be sure to follow them.

Warning (Robot cleaner

2

1. Do not use this appliance on wet surfaces such as near water sources, bathrooms etc;
2. Do not use the appliance to clean up liquids, cigarettes, matches or wet garbage;
3. Do not use the appliance to clean flammable liquids such as kerosene, gasoline; objects with sparks, toner cartridges, toners and other
     combustible dust or use the appliance near the any of the above items or flammable and explosive gases to avoid fire;
4. Do not disassemble, repair, or modify by yourself, so as to avoid causing fire, injury, or poor operation, except for the replacement of
     consumables according to this manual;
5. If the roller brush is abnormal during use, please switch off the appliance and immediately check whether the roller brush is entangled with
     hair, fibers or other windings and clean it up;
6. The battery is sealed and poses no safety hazard under normal circumstances. Under extreme conditions, if liquid leaks out of the battery it
     may cause irritation or burns. 

If touch accidentally occurs to skin, clean the skin immediately with lots of soap and water.  

If touch with

     eyes occurs, immediately rinse with water for at least 15 minutes and seek medical help;
7. The appliance is not to be used by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and
     knowledge, unless they have been given supervision or instruction. Children being supervised can not play with the appliance.
8. Please keep the appliance away from electromagnetic equipment in the hospital;
9. Children should not be allowed to use this appliance as a toy;
10. This appliance can only be used with the cleaning base station provided by the manufacturer;
11. Before disposing of the machine, remove the battery from the machine. Power off the machine before removing the battery. The correct tools
      are required to take out the battery. To open the bottom cover of the appliance and remove the screws firstly. then proceed to unplug the
      battery connection terminal and take out the battery. The used battery pack should be safely recycled and not carelessly disposed of;
12. When the appliance is stored for a long time and is not in use, it is recommended to charge it once a month.
13. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or
      lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and
      understand the hazards involved

WARNING      Precautions that may cause death or serious injury as a result of incorrect operation

Caution          Cautions that may cause minor injuries or damage to the product due to incorrect operation

Hereby, [ROIDMI INFORMATION TECHNOLOGY CO., LTD.] declares that the radio equipment type [2.4GHz WLAN Module] is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:http://doc.roidmi.com/web/
#/27?page_id=0

EN

Содержание SDJ06RM






















Отзывы: