WWW.FOSCAM.COM
FI8918/FI8918W User Manual
5) Upload images via FTP server when motion trigger.
If you want upload images to FTP server when motion trigger. You need set
FTP Service
Settings
first. (Figure 3.22/3.23) Then set motion alarm as below picture.
Choose it
You can set a interval for uploading images
Figure 3.29
There are two ways to alarm.
1) Alarm at any time when motion trigger.
Don’t choose
Scheduler
. The camera will alarm at any time when motion trigger.
2) Plan to alarm.
If you want the camera alarm during the time you set. You need choose
Scheduler
and set time
range. (Figure 3.30)
Click left button on the box of time range. It will turn blue. If you want delete it, just click left button
on it again. It will turn to gray.
Figure 3.30
3.14 PTZ Settings
Here you can set pan/tilt speed. Normally, PT speed is 5; The larger setting number, the lower
speed. Don’t enable the checkbox “disable preset” after you want to use the function of preset,
it
will be effective when you reboot device
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
35
