MIG-135A / MIG-150R
©
Röhr
8
©
Röhr
Environment
1.
The machine can perform in environments where conditions are dry with a maximum
humidity level of 90% and an ambient temperature between -10 to +40 degrees centigrade.
2.
Avoid welding in direct sunshine or a wet/damp environment. If the machine comes into
contact with water, do not use the machine until it has been fully inspected by a qualified
professional.
3.
Do not use the machine in an environment where the air is polluted with conductive dust.
Health and Safety
Technical Data
MIG-135A
MIG-150R
Power Input
Single Phase AC230V±15%
Single Phase AC230V±15%
Frequency (HZ)
50/60
50/60
Rated Input Current (A)
23
25
Output Current MIG (A)
40-135
60-150
Output Voltage
16.5-20.5
16.9-21.5
Duty Cycle (%)
60
60
Power Factor
0.93
0.93
Efficiency (%)
85
85
Wire Spool
Compact
Compact
Wire Speed (M/Min)
2.5-13
2.5-13
Post Puff (S)
1
1
Wire Wheel Diameter (mm)
150
150
Wire Diameter (mm)
0.6-0.8
0.6-0.8
Housing Shielding Grade
IP21
IP21
Insulation Grade
H
H
Suitable Wire Thickness
0.8 and above
0.8 and above
