©
Röhr
©
Röhr
3
MIG-135A / MIG-150R
MIG-135A
MIG/MAG WELDING
1 MIN ON
2 MAX OFF
MIN MAX
INPUT AC 240V
OVER HOT
Quick Start Guide - Setup
The quick start guide can be used to aid the setup of your welder but it’s important to
fully read and understand this manual fully prior to setting up the welding machine.
1.
Ensure that the air intake of the machine is not blocked or covered.
2.
Attach the gas supply and ensure that every part of the gas supply is tightly connected. Poor
connections will allow gas to escape / air could get into the system. Use a regulating valve.
3.
Ground the unit by using the ground connecting screw at the back of the machine and
connect to a grounded metal point free from the weld surface.
MIN MAX
MIG-150R
MIG/MAG WELDER
INPUT
AC 240V
OVER HOT
ON
OFF
0
1
2
3
