Rohnson R-974, Инструкция по эксплуатации

Страница: 5 / 13

4
OPERATIONAL USE OF THE PANEL
ESPRESSO COFFEE ( switch I)
Push the button for espresso preparation, Indicator 1 will come on. When the indicator 2
comes on, push the MODE Switch to “espresso” position and push the start/stop switch to
“start” to make espresso coffee.
MODE SWITCH and START/STOP SWITCH
1)Push the switch to make espresso coffee when the indicator 2 comes on.
When desired coffee is obtained or the colour of coffee changes weak obviously, push the
START/STOP switch to the “STOP” position to stop making coffee.
2)Push the switch to make froth from milk.
Push the switch I and MODE Switch to “froth” position , Indicator 1 will come on.
When the indicator 2 comes on and keep START/STOP Switch at “stop” Position.
Use the steam controller to release the steam to cup.
When the required purpose is reached, turn the steam controller to off position to stop
generating the steam.
DRIP COFFEE ( switch II)
This is used to make drip coffee only.
When selected the process of making coffee will start, Indicator 3 comes on.
It is assumed that the user has filled the reservoir with water and coffee powder in the
machine.
When finished, the indicator 3 stays on indicating, the plate is warming.
When warming is not needed, the user turns off the
switch II
by pressing for 3s
manually. Indicator 3 is off.
OPERATION MANUAL
BEFORE THE FIRST USE
To ensure the first cup of coffee tastes excellent, you should rinse the coffee maker with
warm water as follows:
1. Open the top cover, and pour 1250ml water into water tank.
2. Set nylon funnel in the funnel support (add no coffee powder). Place a paper filter in the
funnel, and then replace the top cover.