2
14,Do not block steam outlets and provide that foreign objects do not get inside them.
15,Do not immerse the unit, the power plug or the power cord into water or other liquids.
16,Do not move or tilt the unit during its operation.
17,Always unplug the unit and pour out water from the water tank during cleaning the unit, if you do
not use it.
18,Unplug the unit before moving it to another place.
19,Do not touch the power plug with wet hands.
20,Before using the unit, closely examine the power cord and make sure that it is not damaged. Do
not use the unit, if its power cord is damaged.
21,Do not dismantle the unit yourself, if any malfunction is detected, apply to the nearest authorized
service center.
22,Regularly clean the unit; do not allow cracks to appear on the sprayer
23,FOR HOUSEHOLD USAGE ONLY
According to instruction: EN 60335-2-98:2003/A11:2019:
•
Be aware that high humidity levels may encourage the growth of biological
organisms in the environment.
•
Do not permit the area around the Humidifier to become damp or wet. If
dampness occurs, turn the output of the Humidifier down. If the Humidifier output
volume cannot be turned down, use the Humidifier intermittently. Do not allow
absorbent materials, such as carpeting, curtains, drapes, or tablecloths, to
become damp.
•
Unplug the appliance during filling and cleaning.
•
Never leave water in the reservoir when the appliance is not in use.
•
Empty and clean the Humidifier before storage. Clean the Humidifier before next
use.
BEFORE USING THE UNIT FOR THE FIRST TIME
Unpack the unit and remove the packing materials. Examine the unit for damages. Do
not switch on the unit if there are any damages in it.
Note:
if the unit was subjected to negative temperatures, before switching it on for the first time,
keep it at room temperature for 30 minutes.
use the unit at +5 -
+40°С temperature, and relative humidity less than 80%.
water temperature should not 40°С.
Before switching on the unit, make sure that the voltage of the electric network
corresponds to the operating voltage of the unit.
