Assemble sequence of the foundation and other parts as follow:
1. Attach the base stand to the hole on the base.
Unscrew and remove the base fixing nut from the base stand if is tightened to the base
stand.
2. Position the base fixing nut on the other side of the base and firmly tighten it by turning
clockwise.
3. To disassembly, loosen the base fixing nut and detach the base stand from the base.
4. Loosen the fan head locking nut. Slightly increase the height of the extension tube as
described in section
Height adjustment. Attach the fan head to the extension tube of the base stand.
5.
Firmly tighten the extension tube locking nut by turning clockwise. To disassembly, loosen
the fan head
locking nut and detach the fan head from the extension tube.
Grill & Fan blade assembly
1. Put the rear guard on the adjustable head by inserting three holes on the rear guard to the three
pins on
the head. Firmly tighten the rear guard fixing nut by turning it clockwise.
2. Insert the big blade on the motor shaft with putting the attention of its correct position. The two
pins on
the motor shaft should match with two holes on the big blade holder.
3. Hold the big blade and firmly tighten the small blade to the motor shaft by turning it
anticlockwise.
Put the front guard on the rear guard. Make sure that each guide on the front guard is locked in the
outer
ring of the rear guard.
Close the plastic lock on the front blade. Firmly tighten the screw by turning it clockwise.
INSTRUCTIONS FOR USE
