⚫
ASSEMBLING INSTRUCTIONS
Base and Standing Shaft Assembly
a.
Attach the lower standing shaft onto the standing
base. Use screws to fix the shaft firmly.
b.
Insert the upper standing shaft into the lower
standing shaft, turning the upper standing shaft
clockwise to tighten the connection of the two
shafts.
The Whole Assembly
a.
Remove the blade fastening screw and guard
fastening screw from the motor shaft spindle.
b.
Fit the rear guard by positioning with the location
pins. Secure the guard onto the motor body with
the guard fastening screw.
c.
Place the fan blade onto the motor shaft by
marching the slot with the shaft pin. Fix the blade
by tightening the blade fastening screw in a
counter-clockwise direction. Check that the fan
blade can rotate freely by turning it with your
hand.
d.
Put the front guard against the rear guard and fix
with the clamping ring. Make sure the clamping
ring is set properly at the rim of the fan guards.
Tighten the screw on the clamping ring.
