5
10-
Body
11-
Screw
12-
Airflow angle adjustment knob
13-
Body connection screw
14-
Height adjustment pipe
15-
Locknut
16-
Stand column
17-
Base
18-
Control panel
19-
On/Off
-
Speed
20-
Timer
21-
Mode adjustment button
22-
Oscillation control button
23-
Remote control
Assembly of the Base Attachment
• Unpack the fan and remove all the parts from the package.
• Use the SCREW NUT provided to attach to the base.
• Loose the locknut for lifting and draw out the lift tube to a certain length, then fasten the
locknut back tightly.
• Insert the lift tube into the hole located on the bottom of the junction petiole in place, then use
screw fix it tightly.
Assembly of the Body on the Bases
• Pass the slot under body into tripod exterior pipe and tighten body connection screw from the
back.
CAUTION: Height adjustment ring must be fully fastened before the assembly of the
motor section to the stand.
