6
Heating being
interrupted in normal
use and a “Beep” will be
heard.
Incompatible cookware or no
cookware is used?
Replace compatible cookware
for the induction cooker.
Is the cookware not considerably
placed form the center of the heating
zone?
Place the cookware at the
center of the defined heating
zone.
Is the cookware being heated but
continually being removed?
Place a cookware inside the
heating zone.
Symptoms
Check points
Remedy
No operation during the
heating being in use.
Is the cookware empty or the
temperature too high?
Please check whether the
appliance is being misused.
Is the air intake/exhaust vent clogged
or dirt has accumulated?
Remove the stuff clogging the
air intake/exhaust vent.
Operate the appliance again
after cooling down.
Is the cooker working over 2 hours
without any external instruction?
Reset cooking modes or use
timer function.
Error codes occur.
E0 Without cookware or Incompatible
cookware used
E1 IGBT sensor open circuit/short
circuit
E2 Internal overheat
E3 Over-voltage
E4 Under-Voltage
E5 Top plate sensor open/short
circuit
E6 Top plate overheat
When showing error signal E0,
E2 and E6, please check
whether the cookware is not
suitable, or switch on the
appliance again after it is
cooled down naturally. When
showing E1, E3-E5, please
contact Service Centre for
checking and repairing.
If the above remedies/controls can not fix the problem, unplug the appliance immediately,
contact Service Centre for inspection and repairing, note the error code and report it to Service
Centre Ltd. To avoid any danger and damage to the appliance, do not disassemble or repair it by
yourself.
6. Product Specifications
Model
R-2450
Rated Voltage
220-240V~50/60Hz
Power
2000W
