Note:
if the unit was subjected to negative temperatures, before switching it
on for the first time, keep it at room temperature for 30 minutes.
use the unit at +5 -
+40°С temperature, and relative humidity less than
80%.
water temperature should not e
xceed +40°С.
Before switching on the unit, make sure that the voltage of the electric
network corresponds to the operating voltage of the unit.
Using the ultrasonic air humidifier
1. Remove the nozzle (1) from the water tank (2).
2. Remove the water tank (2) from unit.
3. Turn over the tank (2); unscrew the lid (3), by turning it anti clockwise.
4. Fill the water tank (2) with necessary quantity of water and screw the lid
(3), by turning it clockwise.
5. Set the filled tank (2) on the body of the unit.
6. Insert the plug into the socket.
7. Switch on the unit, by turning the switch (5) clockwise, the indicator (6)
will light green.
8. Regulate steam intensity by turning the regulator (5).
9. If there is no water in the water tank (2) the indicator will light red
10. Use the switch (5) to switch off the unit and then unplug it. Fill the tank (2)
with water and set the filled tank on the body of the unit.
11. Upon termination of work turn the unit off by turning the regulator (5)
counter-clockwise up to full stop, the indicator of operation (6) will go
out.
Clean and care
Always switch off and unplug the unit before cleaning.
Hard water causes appearance of scale on the “sprayer”(4) and in the
operating chamber; it leads to improper operation of the unit and
appearance of white deposit on the interior objects. To avoid it:
. use boiled water or water, which stood for some time, water, purified by
filter or distilled water;
. clean the operating chamber (4) weekly;
. change water in the water tank (2) more often.
