MK71050-03 Evaluation Kit Hardware Manual
3. Operation procedure
PEXK71050-03_EvalKit_HardManual-01
4
3. Operation procedure
3.1 First setup
①
Install driver software for USB serial IC. Virtual Com Port driver can be downloaded from following link.
②
Insert USB dongle into USB connector on your PC.
③
Run the terminal software and set the below serial port setting.
・
Baud rate
: 38400
・
Data bit
: 8 bit
・
Parity
: None
・
Stop bit
: 1 bit
・
Flow control
: None
④
Push on the reset switch of MK71050-03 wireless module.
Please refer to the Bluetooth Low Energy VSSPP Software User's Guide for more detail procedure.
