Safety | 2
KZS-P_KZS-PG
13 / 43
2.6.1
Dangers due to Flying Parts
During operation, the connection between the clamped workpiece and the
centric clamp KZS-P/KZS-PG may become loose due to mechanical failure
(e.g. due to defective parts) or incorrect operation. The workpiece may then
fly out and cause serious crushing and impact injuries.
To prevent cutting and crushing injuries, ensure perfect functioning of the
centric clamp KZS-P/KZS-PG before each operation.
▪ The centric clamp only reaches the maximum specified clamping force
total when the maximum actuation force is applied.
▪ The clamping force must be checked regularly.
▪ Operation is only permitted with an effective safety guard.
2.6.2
Skin Irritation due to Operating Materials
The lubricant consists of substances which may lead to skin irritations in the
event of frequent skin contact.
In order to minimise the risk of skin irritations, wear long work clothing and
avoid contact with the lubricant. Also observe the safety data sheet of the lub-
ricant and wear safety goggles and protective gloves during maintenance
work when handling lubricants.
2.6.3
Eye Injuries due to Metal Chips
Dangerous metal chips may be produced during machining of metal. During
operation or when cleaning the centric clamp KZS-P/KZS-PG, sharp metal
chips may be stirred up and cause eye injuries and cuts.
To prevent eye injuries and cuts, wear personal protective equipment during
operation and cleaning work. Cleaning with compressed air or a high-pressure
cleaner is not permitted.
Содержание KZS-P
Страница 2: ......
