Datasheet
Datasheet
6/9
BM60052FV-EVK-001
© 2016 ROHM Co., Ltd. All rights reserved.
2016.3.4 Rev.002
www.rohm.co.jp
5-1. Through-hole pin layout, connector layout
5-2. Names of input/output terminals
Power supply, signal input/output:
HIF3BA-14PA-2.54DSA (71) (Hirose Electric)
(Connector side: CN 1-14)
Gate source output, drain input:
φ
2.0 mm through
hole
(Connection side with power module: upper figure [5]
to [11])
CN
Signal
name
Description
TH
Signal
name
Description
1
VDD
Input power (+12 V ~+28 V)
5
S-B
B ch source output
2
GND
Input power (GND)
6
G-B
B ch gate output
3
B_INA
B ch input signal A
7
D-A
A ch drain input
4
B_INB
B ch input signal B
8
S-A
A ch source output
5
B_ENA
B ch enable signal
/D-B
and B ch drain input
6
B_FLT
B ch short circuit detection output
9
G-A
A ch gate output
7
B_RDY
B ch UVLO, gate state monitoring
output
10
TH1
Thermistor terminal 10 (not used)
8
A_INA
A ch input signal A
11
TH2
Thermistor terminal 11 (not used)
9
A_INB
A ch input signal B
X_A: Element-related terminal for upper arm
10
A_ENA
A ch enable signal
X_B: Element-related terminal for lower arm
11
A_FLT
A ch short-circuit detection output
12
A_RDY
A ch UVLO, gate state monitoring
output
For the thermistor terminals, TH1 and TH2 are only
connected to each other on the substrate, and not to
the IC.
13
TH2
Thermistor terminal 11 (not used)
14
TH1
Thermistor terminal 10 (not used)
A_XXX: A ch-related upper arm control-associated terminal
B_XXX: B ch-related lower arm control-associated terminal
14
13
12
11
10
9
8
7
6
5
4
3
2
1
TH [6] [5]
TH [7]
TH [8] [9]
TH [10] [11]
Connector
(CN)
