manualshive.com logo in svg

Rohde & Schwarz ZVT Series, Начало работы

Поделиться
Скачать
Rohde & Schwarz ZVT Series Скачать руководство пользователя страница 83

System Overview

R&S

®

 ZVT

83

Getting Started 1300.0045.62 ─ 10

Calibration unit

Recommended for Frequency range

Connector type

No. of ports

Order no.

R&S ZV-Z51

R&S ZVB4, R&S
ZVB8, R&S ZVA8

300 kHz to 8 GHz

3.5 mm (f)

4

1164.0515.30

R&S ZV-Z51

R&S ZVB4, R&S
ZVB8, R&S ZVA8

300 kHz to 8 GHz

type N (f)

4

1164.0515.70

R&S ZV-Z52

R&S ZVB14, R&S
ZVB20, R&S
ZVA24

10 MHz to 24 GHz

3.5 mm (f)

4

1164.0521.30

R&S ZV-Z52

R&S ZVB14

100 kHz to 18 GHz

type N (f)

4

1164.0521.70

R&S ZV-Z53

R&S ZVB14, R&S
ZVB20, R&S
ZVA24

300 kHz to 24 GHz

3.5 mm (f)

2

1164.0473.32

R&S ZV-Z53

R&S ZVB14

300 kHz to 18 GHz

type N (f)

2

1164.0473.72

R&S ZV-Z54

R&S ZVA40

10 MHz to 40 GHz

2.92 mm (f)

2

1164.0467.92

R&S ZV-Z55

R&S ZVA50

10 MHz to 50 GHz

2.4 mm (f)

2

1164.0480.42

R&S ZN-Z51

R&S ZVB4, R&S
ZVB8

100 kHz to 8.5 GHz 3.5 mm (f)

4

1319.5507.34

R&S ZN-Z51

R&S ZVB4, R&S
ZVB8

100 kHz to 8.5 GHz 3.5 mm (f)

2

1319.5507.32

R&S ZN-Z51

R&S ZVB4, R&S
ZVB8

100 kHz to 8.5 GHz type N (f)

4

1319.5507.74

R&S ZN-Z51

R&S ZVB4, R&S
ZVB8

100 kHz to 8.5 GHz type N (f)

2

1319.5507.72

R&S ZN-Z51

custom configura-
tion

R&S ZVB4, R&S
ZVB8

The R&S ZN-Z51 allows a free/mixed port configuration with possible connector types
N (m/f), 3.5 mm (m/f) and 7/16 (m/f).

With an N(f)-type CalU serving as base unit, for each available port an alternative con-
nector type N(m), 3.5 mm (m/f) or 7/16 (m/f) can be selected. For N(f)-type models
alternative connectors can be also be retrofitted, but the calibration unit has to be sent
to service for that and has to be characterized again. See the data sheet for ordering
information.

The frequency range for 7/16 connector ports is limited to 100 kHz to 7.5 GHz.

Calibration

Содержание ZVT Series



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды