manualshive.com logo in svg

Rohde & Schwarz ZNB20, Руководство пользователя

Rohde & Schwarz ZNB20 - Профессиональный анализатор векторной сети для точных измерений. Ищите пользовательский мануал? Можете бесплатно скачать его с {веб-сайта}. Узнайте все о продукте, следуя инструкциям в руководстве. Начните использовать ZNB20 сегодня!

Поделиться
Скачать
background image

Command Reference

R&S

®

 ZNB/ZNBT

979

User Manual 1173.9163.02 ─ 38

[SENSe<Ch>:]CORRection:EDELay<PhyPt>:ELENgth

....................................................1013

[SENSe<Ch>:]CORRection:EDELay<PhyPt>[:TIME]

....................................................... 1013

[SENSe<Ch>:]CORRection:LOSS<PhyPt>

.....................................................................1014

[SENSe<Ch>:]CORRection:LOSS<PhyPt>:AUTO

........................................................... 1014

[SENSe<Ch>:]CORRection:LOSS<PhyPt>:FREQuency

.................................................. 1015

[SENSe<Ch>:]CORRection:LOSS<PhyPt>:OFFSet

.........................................................1015

[SENSe<Ch>:]CORRection:OFFSet<PhyPt>[:STATe]

..................................................... 1015

[SENSe<Ch>:]CORRection:OFFSet<PhyPt>:COMPensation[:STATe]

...............................1016

[SENSe<Ch>:]CORRection:OFFSet<PhyPt>:DFComp[:STATe]?

......................................1016

[SENSe<Ch>:]CORRection:PCAL

................................................................................. 1017

[SENSe<Ch>:]CORRection:POWer:DATA

......................................................................1017

[SENSe<Ch>:]CORRection:POWer:DATA:PORT<PhyPt>

............................................... 1017

[SENSe<Ch>:]CORRection:POWer<PhyPt>[:STATe]

...................................................... 1018

[SENSe<Ch>:]CORRection:POWer<PhyPt>:ACQuire

......................................................1019

[SENSe<Ch>:]CORRection:POWer<PhyPt>:AWAVe[:STATe]

..........................................1020

[SENSe<Ch>:]CORRection:POWer<PhyPt>:IMODulation:ACQuire

...................................1020

[SENSe<Ch>:]CORRection:STIMulus?

.......................................................................... 1021

[SENSe<Ch>:]CORRection:STIMulus:PORT<PhyPt>?

.................................................... 1021

[SENSe<Ch>:]CORRection:COLLect:AUTO:CONFigure

.................................................. 1022

[SENSe<Ch>:]CORRection:COLLect:AUTO:ASSignment:DELete:ALL

.............................. 1022

[SENSe<Ch>:]CORRection:COLLect:AUTO:ASSignment:DEFine:DEFault

........................ 1023

[SENSe<Ch>:]CORRection:COLLect:AUTO:ASSignment:DEFine:TPORt:DEFault

............. 1023

[SENSe<Ch>:]CORRection:COLLect:AUTO:ASSignment:COUNt?

................................... 1024

[SENSe<Ch>:]CORRection:COLLect:AUTO:ASSignment:ALL:COUNt?

.............................1024

[SENSe<Ch>:]CORRection:COLLect:AUTO:ASSignment<Asg>:DEFine

........................... 1025

[SENSe<Ch>:]CORRection:COLLect:AUTO:ASSignment<Asg>:DEFine:TPORt

................ 1027

[SENSe<Ch>:]CORRection:COLLect:AUTO:ASSignment<Asg>:ACQuire

..........................1027

[SENSe<Ch>:]CORRection:COLLect:AUTO:SAVE

..........................................................1027

[SENSe<Chn>:]CORRection:PSTate?

............................................................................1028

[SENSe<Chn>:]CORRection:SSTate?

............................................................................1028

[SENSe:]CORRection:COLLect:AUTO:CKIT 

<Characterization>

Generates a characterization (cal kit file) with the specified name containing the cal kit
data of the active calibration unit (selected via 

SYSTem:COMMunicate:RDEVice:

AKAL:ADDRess

). The cal kit file can be saved to a directory on the analyzer, to the

calibration unit's internal (flash) memory or to an SD card inserted at the calibration unit
(if available).

Note

 that this command can only be executed if the number of cal unit ports is less or

equal to the number of test ports. Furthermore the command assumes the "canonical"
assignment of cal unit ports to test ports: cal unit port 1 assigned to test port 1, cal unit
port 2 assigned to test port 2 etc. The new command 

[SENSe:]CORRection:

COLLect:AUTO:CKIT:PORTs

 allows for flexible assignments.

SCPI Command Reference

Содержание ZNB20





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для ZNB20

QLA KT2 Operating Instructions Manual preview
KT2
Бренд: QLA Страницы: 18
3B6 SLIM Operator'S Manual preview
SLIM
Бренд: 3B6 Страницы: 30
Eaton Network Card-MS Quick Start Instructions preview
Network Card-MS
Бренд: Eaton Страницы: 26
Wavetek MS1000 Operation Manual preview
MS1000
Бренд: Wavetek Страницы: 43
Omano CX-3 User Manual preview
CX-3
Бренд: Omano Страницы: 14
Yamaha AW2816 Tutorial preview
AW2816
Бренд: Yamaha Страницы: 31
YOSensi Airflow Pro2 Quick Installation Manual preview
Airflow Pro2
Бренд: YOSensi Страницы: 3
aci ACCESS series Assembly, Installation And Operation Instructions preview
ACCESS series
Бренд: aci Страницы: 5
JUMO LOGOSCREEN 601 Manual preview
LOGOSCREEN 601
Бренд: JUMO Страницы: 24
Fluke Comark Diligence 600 Reference Manual preview
Comark Diligence 600
Бренд: Fluke Страницы: 61
Rodstation PCHD02 User Manual preview
PCHD02
Бренд: Rodstation Страницы: 28
QEED QI-POWER-485-300 Quick Manual preview
QI-POWER-485-300
Бренд: QEED Страницы: 2
Omega DP6060 User Manual preview
DP6060
Бренд: Omega Страницы: 100
Omega HHAQ-108 User Manual preview
HHAQ-108
Бренд: Omega Страницы: 22
Velleman-Kit K4307 Manual preview
K4307
Бренд: Velleman-Kit Страницы: 9
YOKOGAWA Vigilant Plant MR20000 User Manual preview
Vigilant Plant MR20000
Бренд: YOKOGAWA Страницы: 230
Omega HHM598F Manual preview
HHM598F
Бренд: Omega Страницы: 13
Fluke 279 FC Calibration Manual preview
279 FC
Бренд: Fluke Страницы: 22

Бренды по названию

Популярные бренды

Загрузить еще бренды