Rohde & Schwarz TSMA6 Series, Начало работы

Страница: 42 / 55

Configuring the R&S TSMA6
R&S
®
TSMA6
42 Getting Started 4900.8040.02 ─ 06
In the drop-down menu, select a ROMES workspace file (see "Import of
ROMES Workspace File" on page 43).
● Recording
Activating this checkbox, the ROMES measurement data are written to the
TSMA6 hard disk.
● IP Controlled
Activating this checkbox, the ROMES measurement can be controlled via
IP from an external host PC.
3. Click "Submit" to save your selection.
For more details about the R&S
®
ROMES configuration and usage, refer to the
user documentation for R&S
®
ROMES.
6.4 Import of Workspace Files (NESTOR, ROMES)
Import NESTOR workspace file
1. Start the R&S TSMA6 web GUI from the host PC (see Chapter 6.1.1, "Start
the R&S TSMA6 Web GUI" , on page 30).
2. Navigate to "Configuration" > "System" > "Mode" and set measurement mode
to "NESTOR Probe".
3. Press "Submit" and wait until the device is in "NESTOR Probe" mode. (In the
status bar, the entry is "No error".)
4. Navigate to "File Transfer" and press the "Browse..." button in the "Upload"
section.
5. Search on the host PC for the NESTOR workspace file to be imported and
confirm the dialog with "Open".
6. Press "Upload".
The file is copied to the NESTOR workspace directory (default:
D:\Users\Instrument\Documents\NESTOR\FavoriteWorkspaces
).
This path can be configured in the "File Transfer" menu.
7. Navigate back to "Configuration" > "System" > "Mode".
8. The imported workspace file is selectable from the list box in the "Mode" tab.
Import of Workspace Files (NESTOR, ROMES)