Rohde & Schwarz TSMA6 Series, Начало работы

Страница: 31 / 55

Configuring the R&S TSMA6
R&S
®
TSMA6
31 Getting Started 4900.8040.02 ─ 06
b) Connect your tablet or smartphone with the TSMA6 WLAN network. The
required login information can be found on a label on the bottom side of
the R&S
TSMA6.
WLAN-Access point SSID: default TSMA6-xxxxxx (xxxxxx is the serial
number of this specific R&S TSMA6)
Default key: instrument
Note :
The SSID and the key are configurable via the web GUI.
The WLAN connection between the tablet or smartphone and the
R&S
TSMA6 device is established.
2. On the tablet or smartphone, start a web browser and enter the following URL:
http://192.168.137.1/
The configuration web GUI of the R&S TSMA6 is started.
LAN
1. Connect the R&S TSMA6 LAN port with the host PC port.
2. Use the R&S TSMA6 default IP settings, that is, the DHCP client. The
R&S TSMA6 and the remote host PC automatically negotiate the IP address.
Alternatively, use the fixed address.
3. Start a web browser via the R&S TSMA6 web GUI and enter the following
URL:
http://TSMA6-<xxxxxx>.local (xxxxxx is the serial number of this specific
R&S TSMA6)
Local access from the R&S TSMA6 and Windows Explorer
► Open Internet Explorer using mouse, keyboard and monitor. The R&S TSMA6
web GUI opens automatically. If not, type the following URL:
http://localhost
6.1.2 Establish a Remote Desktop Connection
To establish a remote desktop connection, the following steps must be performed:
1. A WLAN/LAN connection between the R&S TSMA6 and the remote PC has to
be established, see Chapter 6.1.1, "Start the R&S TSMA6 Web GUI" ,
on page 30 .
Accessing the R&S TSMA6