Remote control commands
R&S
®
SMM100A
725
User Manual 1179.1341.02 ─ 05
:SCONfiguration:EXTernal:FADer<ch>:RF:STATe
<RemConnState>
:SCONfiguration:EXTernal:RF<ch>:RF:STATe
<RemConnState>
:SCONfiguration:EXTernal:IQOutput<ch>:RF:STATe
<RemConnState>
Sets the RF output state of the connected external instrument.
Parameters:
<RemConnState>
1 | ON | 0 | OFF
Example:
SCONfiguration:EXTernal:IQOutput1:RF:COUPling ON
OUTput1:STATe ON
SCONfiguration:EXTernal:IQOutput1:RF:STATe?
// Response: "1"
Example:
SCONfiguration:EXTernal:BBMM1:RF:COUPling OFF
SCONfiguration:EXTernal:BBMM1:RF:STATe ON
Example:
See
Example "Connecting and configuring external instruments"
Manual operation:
See
:SCONfiguration:EXTernal:REMote:SCAN
Scans the network for connected instruments.
Example:
See
Example "Connecting and configuring external instruments"
Usage:
Event
Manual operation:
See
:SCONfiguration:EXTernal:REMote:SCAN:STATe?
Queries if scanning is performed or not.
To start the scanning process, use the command
Return values:
<ScanState>
1 | ON | 0 | OFF
1
Scanning process running
0
Not scanning
Example:
See
Example "Connecting and configuring external instruments"
Usage:
Query only
Manual operation:
See
SCONfiguration subsystem