Rohde & Schwarz SMM100A, Руководство пользователя

Страница: 489 / 1088

File and data management
R&S
®
SMM100A
489 User Manual 1179.1341.02 ─ 05
Note:
In contrast to the [Preset] key, the SCPI commands
*RST
and
:SYSTem:PRESet
do
not close open dialogs in the GUI.
Consider also the following possibilities:
●
You can define the settings that are restored when you preset the instrument
(see
Chapter 10.2.3, "How to recall user settings automatically after preset" ,
on page 490)
●
You can reset the instrument to the factory state
(see
"Execute Factory Preset" on page 489)
See also Table 10-1 that contains the key parameters that are reset by the correspond-
ing preset functions.
Remote command:
*RST
on page 657
Set To Default
Resets the associated settings of the corresponding dialog or tab.
Remote command:
For example,
[:SOURce<hw>]:BB:<Digital Standard>:PRESet
Preset this Parameter
Restores the default value of a single parameter.
Execute Factory Preset
Resets the instrument to its factory settings.
Note: "Factory Preset" retains all security settings and does not delete any user files
like setups or user data.
See also
Table 10-1 that contains the key parameters that are reset by the correspond-
ing preset functions.
Remote command:
:SYSTem:FPReset
on page 660
10.2.2 How to identify parameters which are not in a preset state
To recognize the current state of the settings related to their default values at the first
glance, enable a function that visually identifies parameters in states different than pre-
set.
To activate this display:
1. Open the context-sensitive menu (touch and hold the screen anywhere in the GUI
of the R&S SMM100A).
2. Select "Mark all parameters changed from preset".
Restoring the (default) instrument configuration