Rohde & Schwarz SMM-K507, Руководство пользователя, Страница: 19 / 51

ARB ethernet upload configuration and settings
R&S
®
SMM-K507
19 User Manual 1179.5718.02 ─ 02
Settings:
State ..............................................................................................................................19
Set To Default ................................................................................................................19
Mode ............................................................................................................................. 19
Status ............................................................................................................................ 19
Waveform Counter ........................................................................................................ 20
Ethernet Mode ...............................................................................................................20
Waveform Info ............................................................................................................... 20
Local QSFP Network Settings .......................................................................................20
State
Enables/disables ARB modulation. Switching on the ARB generator turns off all the
other digital standards and digital modulation types in the same signal path.
For more information, see chapter "ARB general settings" in the R&S SMM100A user
manual.
Set To Default
Calls default settings.
For more information, see chapter "ARB general settings" in the R&S SMM100A user
manual.
Mode
Sets the mode of the ARB application.
"Standard" Standard ARB mode for playing waveform files using the internal
baseband source.
"Ethernet Upload"
Requires R&S SMM-K507.
ARB mode for uploading waveform files using the external QSFP+
interface.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:MODE
on page 28
Status
Displays the status of the ARB Ethernet upload application.
"No Waveform" No waveform available as source.
"Uploading" Loads ARB waveform data into the ARB memory of the
R&S
SMM100A. The R&S SMM100A receives the data from the
external device connected to the QSFP+ network.
"Waiting for Trigger"
Expects a trigger signal for starting ARB Ethernet upload.
"Running" Plays the waveform that is loaded into the ARB memory of the
R&S
SMM100A.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:ETHernet:STATus?
on page 28
General settings