Rohde & Schwarz SMM-K507, Руководство пользователя, Страница: 28 / 51

Remote control commands
R&S
®
SMM-K507
28 User Manual 1179.5718.02 ─ 02
[:SOURce<hw>]:BB:ARBitrary:MODE <ArbMode>
Defines the mode of the ARB application.
Parameters:
<ArbMode> STANdard | EUPLoad
STANdard
ARB standard mode using a waveform file as internal baseband
source.
EUPLoad
ARB Ethernet upload mode for uploading waveform files via the
external QSFP+ interface.
*RST:
STANdard
Example: See Example"Activating ARB Ethernet upload" on page 27.
Options: EUPLoad requires R&S SMM-K507.
Manual operation: See "Mode" on page 19
[:SOURce<hw>]:BB:ARBitrary:ETHernet:MODE <Mode>
Sets the Ethernet mode for the waveform data upload via the Ethernet connection.
Parameters:
<Mode> M10G | M40G
M10G
10 Gbit Ethernet mode
M40G
40 Gbit Ethernet mode
*RST:
M10G
Example: See Example"Activating ARB Ethernet upload" on page 27.
Manual operation: See "Ethernet Mode" on page 20
[:SOURce<hw>]:BB:ARBitrary:ETHernet:STATus?
Queries the status of the ARB Ethernet upload application.
Return values:
<Status> string
"No Waveform"
No waveform available as source.
"Uploading"
Loads ARB waveform data into the ARB memory of the
R&S
SMM100A. The R&S SMM100A receives the data from the
external device connected to the QSFP+ network.
"Waiting for Trigger"
Expects a trigger signal as configured for starting ARB Ethernet
upload.
General commands