manualshive.com logo in svg

Rohde & Schwarz SMBV100A, Руководство по эксплуатации

Поделиться
Скачать
Rohde & Schwarz SMBV100A Скачать руководство пользователя страница 64

Preparing for Use

R&S

®

SMBV100A

49

Operating Manual 1176.8016.02 ─ 17

2.7.2 Remote Access via a VNC Client Software

A VNC client software is an application which can be used to access and control the
instrument from a remote computer via LAN.

The following description explains how to establish the remote access, represented by
means of the client software Ultr@VNC. The software is included in Linux/Unix operat-
ing system, but it is also available as a free-of-charge download on the Internet 

http://

www.uvnc.com/download/index.html

. Thus, it is also available for remote computers

with Windows operating system.

The GUI appearance of Ultr@VNC may vary if you use a later release. Also, similar
programs may deviate in some details, but the basic procedure is the same.

Risk of unauthorized access

If the VNC service is enabled on the instrument, any user in the network who knows
the computer name and password can access it.
Disable the VNC service on the instrument to prevent unauthorized access.

Setting up a VNC connection

1. Connect the instrument and the remote computer to a LAN, see 

Chapter 2.6.1,

"Connecting the Instrument to the Network"

, 

on page 43.

2.

Install the Ultr@VNC application

 and enable it on the instrument.

3. In the ICF firewall, enable communication on the network via Ultr@VNC program.

4. Install the VNC Viewer on the remote computer with Windows operating system,

see 

"Installing the VNC Viewer on a Windows PC"

 

on page 51.

5. Set up the VNC connection between the instrument and:

a) the remote computer with Linux/Unix operating system, see 

"Setting up the

VNC connection on the Linux/Unix remote computer"

 

on page 51;

b) the remote computer with Windows operating system, see 

"Setting up the VNC

connection on the Windows remote computer"

 

on page 52.

Enabled Direct Control

The direct control of the instrument is not disabled and the instrument can be control-
led from the front panel and via the remote computer alternately.

Installing the Ultr@VNC application

1. Download the program from the internet and copy it to a directory that can be

accessed.

2. On the instrument, shut down firmware using the ALT+F4 key combination.

 

Remote Access via an External Controller

Содержание SMBV100A
















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды