R&S Smart Instruments™ Family300 Basic Programming
Guide
1MA73
11
Rohde & Schwarz
The following DLLs are available:
Instrument driver
DLL name
FS300 and FS315 spectrum
analyzers
rssifs_32.dll
SM300 signal generator
rssism_32.dll
AM300 arbitrary/function
generator
rssiam_32.dll
UP300 and UP350 audio
analyzers
rssiup_32.dll
Figure 7: Searching for the reference
National Instruments LabView
The following process refers to National Instruments LabView Express
7.0.
In order to integrate the Family300 drivers as standard drivers in
LabView, after installation of the LabView drivers it is necessary for the
complete directory (with VISA: c:\VXIpnp\GWIN\rssixx and without
VISA: myinstallationdrive:\rssifs\LabView) to be copied to LabView
directory "inst.lib". If LabView is already open, you must close it and re-
open it in order to use the instrument drivers.
The drivers are then available in the block diagram at Functions->Input-
>Instruments Drivers.
National Instruments LabWindows/CVI
The following process refers to National Instruments LabWindows/CVI
7.0.
After installation of the LabWindows/CVI driver the fp (front panel) file
can be included in the project. It is then available under "Instruments".
Select "Browse" to search for the DLL
