Rohde & Schwarz RTM2000 Скачать руководство пользователя страница 61

Страница: 61 / 70

Operating the Instrument

R&S

RTM2000

Getting Started 1317.4710.02 ─ 0101

The on-screen keypad opens.

To enter data with the on-screen keypad or keyboard

On-screen keypad and keyboard are used in the same way. When text input is
required, the on-screen keyboard is displayed automatically.

1. For each character to be entered, turn the NAVIGATE knob until the required char-

acter is highlighted, then press the knob.

2. To delete the character to the left of the cursor in the input line, press "Backspace".

3. To move the cursor within the input line, press "Cursor

←

" or "Cursor

→

4. To delete the entire entry, press "Clear All".

5. When you have completed your entry, press "Accept" to store the input on the

instrument.

5.5 Getting Help

The integrated help system provides the description of all function keys, rotary knobs
and softkeys.

Getting Help

Содержание RTM2000







































































Результаты поиска

Содержание RTM2000

Отзывы:

Rohde & Schwarz RTM2000, Начало работы, Страница: 61 / 70

Результаты поиска

Содержание RTM2000

Отзывы: