manualshive.com logo in svg

Rohde & Schwarz RTM2000, Начало работы, Страница: 31 / 70

Поделиться
Скачать
Rohde & Schwarz RTM2000 Скачать руководство пользователя страница 31

Instrument Tour

R&S

®

RTM2000

16

Getting Started 1317.4710.02 ─ 0101

The virtual screen has 20 vertical divisions, 8 of them are displayed. If many wave-
forms are active, you can distribute the waveforms over 20 divisions and turn the knob
to scroll the virtual screen. You can disable the virtual screen in the "Display" menu.
The virtual screen is available in the usual time domain window and in the zoom win-
dow.

3.1.2 MEASURE Keys

The MEASURE functional block provides the automatic and manual measurement
functions.

QUICK MEAS

Displays the results of basic automatic measurements for the selected channel in the
result table and directly on the waveform. For voltage measurements, these are: Vp+,
Vp-, Vpp, V RMS, mean, rise time tr, falling time tf, period T and frequency f.

Press the key again to hide the results.

Note: 

When you activate quick measurements, cursor measurements are automati-

cally deactivated, as well as the reference and math menus. Deactivate quick meas-
urements before selecting these functions. Channels other than the selected one are
switched off in quick measurement mode.

MEAS

Opens the "Measurement" menu, where you can configure up to 4 parallel measure-
ments. Available measurement types depend on the type of the selected waveform.

CURSOR

Opens the "Cursor" menu, where you can set up various manual measurements by
means of cursors.

3.1.3 NAVIGATION Controls

The rotary knob and the navigation keys support the data entry in various ways.

 

 

Front Panel

Содержание RTM2000







































































Отзывы:

Нет отзывов