Product Description
R&S
®
RT-ZS10E/10/20/30
8
User Manual 1410.3531.02 ─ 07
1.2.1
Inspecting the Contents
●
Inspect the package for damage.
Keep the package and the cushioning material until the contents have been
checked for completeness and the device has been tested.
If the packaging material shows any signs of stress, notify the carrier and your
Rohde
&
Schwarz service center. Keep the package and cushioning material
for inspection.
●
Inspect the probe.
If there is any damage or defect, or if the R&S
RT
‑
ZS10/20/30 active voltage
probe does not operate properly, notify your Rohde
&
Schwarz service center.
●
Inspect the accessories.
If the contents are incomplete or damaged, notify your Rohde
&
Schwarz ser-
vice center.
Accessories supplied with the device are listed in
Chapter 1.4.1, "Accessories
Supplied"
,
on page 10.
1.3
Description of the Probe
The probe consists of the probe head for connection to the DUT, the probe box
for connection to the oscilloscope, and the probe cable.
1.3.1
Probe Head
The small and lightweight probe head is designed for easy handling and high-per-
formance measurements. The probe head is used for connecting the probe and
the DUT. Different accessories for the signal and ground sockets allow the probe
head to be connected to a wide range of DUTs.
Description of the Probe
