Connecting the Board
R&S
®
RT-ZF8
6
Manual 1801.4210.02 ─ 01
X62, X65, X73, X74
Connectors for an arbitrary waveform generator.
X63, X64
Connectors for an oscilloscope.
X72, X75
Connectors for an oscilloscope with a probe.
General Purpose SMA Adaptor
This section of the board can be used for several compliance test cases, includ-
ing the Common Mode Conversion Tests. It allows you to change from twisted-
pair cables to SMA ones.
3
Connecting the Board
The appropriate DUT and probe connection depends on the test case. The
R&S
ScopeSuite software provides a step-by-step guide that shows the required
setup for each test case.
The test preparation and measurements of the test cases are described in the
"R&S®RTO, R&S®RTP Ethernet Compliance Tests, Test Procedures Manual".
