manualshive.com logo in svg

Rohde & Schwarz R&S SFE100, Начало работы, Страница: 73 / 79

Поделиться
Скачать
Rohde & Schwarz R&S SFE100 Скачать руководство пользователя страница 73

Installed Software

R&S

®

SFE100

54

Getting Started 2112.4122.62 ─ 13

1. In the "Windows

 

XP Embedded Recovery and Backup Partition" dialog (see 

"To

display the Windows XP Embedded Recovery and Backup Partition dialog"

on page 51), click "Make Backup".

The "Make Backup" dialog is displayed. It shows the current versions of the firm-
ware and the software platform.

2. Click "Make Backup".

After the backup, the "Windows

 

XP Embedded Recovery and Backup Partition"

dialog is displayed again.

3. Click "Exit and Shutdown".

4. Turn off/on the R&S

 

SFE100 manually.

10.3.3.2

Recovering the Selected Version of System Partition

Only R&S

 

SFE100 models 12, 13.

1. In the "Windows

 

XP Embedded Recovery and Backup Partition" dialog (see 

"To

display the Windows XP Embedded Recovery and Backup Partition dialog"

on page 51), click "Restore Backup" to recover a selected version of the system
partition.

The "Restore Backup" dialog is displayed. It shows the versions of the firmware
and the software platform of the backup displayed under "Select Backup".

 

Windows

 

XP Recovery and Backup Partition

深圳德标仪器 

135-1095-0799

Содержание R&S SFE100
















































































Отзывы:

Нет отзывов