manualshive.com logo in svg

Rohde & Schwarz R&S SFE100, Начало работы, Страница: 2 / 79

Поделиться
Скачать
Rohde & Schwarz R&S SFE100 Скачать руководство пользователя страница 2

This manual describes the following models:

●

R&S

®

SFE100, model .02 (2112.4100.02)

●

R&S

®

SFE100, model .12 (2112.4100.12)

●

R&S

®

SFE100, model .03 (2112.4100.03)

●

R&S

®

SFE100, model .13 (2112.4100.13)

The software contained in this product uses several valuable open source software packages. For information, see the "Open
Source Acknowledgment" document, which is available for download from the R&S

 

SFE100 product page at www.rohde-

schwarz.com/product/sfe100.html > "Downloads"

 

> "Firmware".

Rohde & Schwarz would like to thank the open source community for their valuable contribution to embedded computing.

© 2017 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Fax: +49 89 41 29 12 164
Email: 

[email protected]

Internet: 

www.rohde-schwarz.com

Subject to change – Data without tolerance limits is not binding.
R&S

®

 is a registered trademark of Rohde & Schwarz GmbH & Co. KG.

Trade names are trademarks of their owners.

Throughout this manual, products from Rohde

 

& Schwarz are indicated without the ® symbol , e.g. R&S

®

SFE100 is indicated as

R&S

 

SFE100.

深圳德标仪器 

135-1095-0799

Содержание R&S SFE100
















































































Отзывы:

Нет отзывов