Preparing for use
R&S
®
QAR50
13
Getting Started 1179.4986.02 ─ 03
Unpacking the R&S
QAR50
1.
WARNING!
Risk of physical injury caused by heavy items. See
Move the delivery box to a place near the installation site.
2. Remove the top lid of the wooden box the R&S
QAR50 is delivered in.
Disassembling the box requires a screwdriver, because the box parts are screwed
to one another.
3. Remove the bars that hold secure the R&S
QAR50 inside the box.
4. Remove the four side parts of the box.
5. Using the delivery notes, check the equipment for completeness.
6. Check the equipment for damage.
If the delivery is incomplete or equipment is damaged, contact Rohde
&
Schwarz.
7.
WARNING!
Risk of physical injury caused by heavy items. See
Carefully lift the R&S
QAR50 out of the box.
Lifting the R&S
QAR50 out of the transport box
Use a crane or similar lifting device to lift the R&S
QAR50 out of its transport box.
1. Unpack the R&S
Chapter 4.2, "Unpacking and checking"
Included in the delivery are four eye bolts. The eye bolts serve as lifting points. Use
these bolts to attach appropriate lifting equipment. We recommend using a crane to
lift and move the R&S
QAR50.
2. Screw the four eye bolts into the mounting holes on top of the R&S
QAR50.
Make sure that the bolts sit tight in the mounting holes. They sit tight if you cannot
screw them any further into the mounting holes.
3.
WARNING!
Risk of physical injury caused by heavy items. See
The product is heavy. Moving the R&S
QAR50 safely is only possible with appropri-
ate lifting equipment (like a crane) and a suitable lifting harness (like a four leg
rope). Commission personnel that is qualified to safely attach the R&S
QAR50 to
the lifting equipment, to operate the lifting equipment and take the necessary safety
measures.
Attach the the lifting device.
Unpacking and checking