Rohde & Schwarz R&S FSV-B30 Скачать руководство пользователя

Страница: 25 / 25

R&S FSV-B30/-B31

NiMH Battery Pack R&S FSV-B31

Installation Guide 1310.9900.00 - 04

2.3.2 Connecting the DC Power

Connect the R&S FSV DC supply to the battery pack using the cigarette lighter
plug.

2.3.3 Switching the Instrument On and Off

Switching the instrument on

1. Press the DC power switch at the DC power supply to position "I". A green LED

indicates that the DC supply is ready for operation.

2. In case of overvoltage or undervoltage, the DC power supply is automatically

switched off. A red LED and a buzzer indicates this.

3. Press the AC power switch on the rear panel to position "I".

The instrument is supplied with AC power.

4. Press the ON/OFF key at the front panel. After booting, the instrument is ready for

operation. A green LED above the ON/OFF key indicates this.

Switching the instrument off

1. Press the ON/OFF key at the front panel.

2. Change the AC power switch at the rear panel to position "O". The R&S FSV

changes into off mode.

3. Press the DC power switch at the DC power supply to position "O". The DC supply

changes into off mode.

Содержание R&S FSV-B30


























Результаты поиска

Содержание R&S FSV-B30

Отзывы:

Похожие инструкции для R&S FSV-B30

Бренды по названию

Популярные бренды

Rohde & Schwarz R&S FSV-B30, Руководство по установке

Результаты поиска

Содержание R&S FSV-B30

Отзывы:

Похожие инструкции для R&S FSV-B30

Бренды по названию

Популярные бренды